Beaded Ball Chandelier

Beaded Ball Chandelier

Beaded Ball Chandelier

ceiling lights, interior decor, home decor, bedroom lights, living room lights

Beaded Ball Chandelier is available to buy in increments of 1

Voylite lumens meter

* Bulb not included


Update your home with this ball design pendant light that features a metal frame with lovely crystals interpolated on it, for an industrial look. This pendant light has one bulb that provides ample multi-directional lighting to any small room. Made from crystal and metal, this fixture casts light in multiple directions, illuminating the particular area.

There might be slight colour variation between actual product and image shown on the screen due to photography effect.

This fixture is 'made on order' and it take 25-30 working days to manufacture. It typically takes another 2 to 10 working days for the order to reach you based on your location.

We carefully inspect each item prior to shipment, and also require your inspection and signature upon delivery. Should you discover a defect in your fixture, please contact us within 48 hours of delivery. We do not gauranteen to resolve issues / concerns raised after 48 hours of delivery. Unboxing video is a must for refunds/replacements. Product cannot be refused because it does not fit or match your decor. We encourage to study the specifications mentioned on the product page carefully before ordering.

Fixture Material: Brass & Glass
Adjustable: No
Assembly Required: Yes

Fixture Color: Brushed Brass
Cord Color: Black

Light Specifications
Light Direction: Ambient
Bulb Base: E27
Cord Length: 100 cms


Dirty light fixtures can emit up to 20% lesser light than clean ones, so regular cleaning and dusting go a long way toward brightening your living spaces.

For safety purposes, never attempt to clean or work on a lighting fixture with an active electrical current. The best bet is to unplug fixtures or turn off the circuit breaker prior to cleaning. Also, never allow liquid to touch wiring.

Wash coated metal surfaces with a clean soft cloth soaked in detergent and warm water; rinse thoroughly. Dry the surface with a clean soft white cloth.Do not use abrasive, acid, alcohol-based, or solvent-based cleaners; they may damage the finish.

In case the glass globe/shade can be removed; support the glass firmly with your hands while you remove the screws or clamps holding it in place. When you've safely removed the glass from the fixture, dump any dirt or dead bugs out into the trash and fill a bucket or your sink with warm, soapy water. Soak the glass in the water for a few minutes.

Also, do take a look at the light bulb(s) themselves and determine if they need any attention. If your bulbs have a dirty film on them, your room may be getting less light than it should be! Using a damp cloth, very gently wipe any residue from your bulbs and allow the bulbs several minutes to dry completely. Replace the bulbs into their fixtures. After soaking the glass for a few minutes, use a sponge or cloth to wipe away any remaining grime, then dry it completely with a towel. Replace the glass with the screws or clamps. If you can't remove the glass or would rather clean them in place, be sure to spray any water or cleaning solution onto a cleaning cloth first, not directly onto the fixture.

  • Reviews
Write Your Own Review

Your Rating