Monstera Chandelier

Monstera Chandelier


Voylite lumens meter

* Bulb not included


Hanging lights are nice and attractive especially if it got some design like what the Monstera Chandelier has. When the lights are on, its bright rays will attractively reflects to each leaf, which eventually creates wonderful leafy shades on the outer part of the lamp. At daytime when the lights are off, the fashionable Monstera lamp is an elegant interior design in fresh and green colour. Own one now and feel the beauty of the Monstera all day and night. Handcrafted in India, these are made to order and usually take 30 working days to be shipped.

Fixture Material: Brass
Adjustable: No
Assembly Required: Yes

Fixture Color: Antique Brass & Green
Cord Color: Clear

Light Specifications
Light Direction: Ambient
Bulb Base: MR16
Recommended Bulb: 2.5W LED
Cord Length: 120 cms
Cord Material: PVC

Width: 35 cms
Length: 35 cms
Diameter: 35 cms
Height: 90 cms
Weight: 9 kgs

Package Contents
Fixture Set with wiring


Dirty light fixtures can emit up to 20% lesser light than clean ones, so regular cleaning and dusting go a long way toward brightening your living spaces.
For safety purposes, never attempt to clean or work on a lighting fixture with an active electrical current. The best bet is to unplug fixtures or turn off the circuit breaker prior to cleaning. Also, never allow liquid to touch wiring.
Wash coated metal surfaces with a clean soft cloth soaked in detergent and warm water; rinse thoroughly. Dry the surface with a clean soft white cloth.Do not use abrasive, acid, alcohol-based, or solvent-based cleaners; they may damage the finish.
In case the glass globe/shade can be removed; support the glass firmly with your hands while you remove the screws or clamps holding it in place. When you've safely removed the glass from the fixture, dump any dirt or dead bugs out into the trash and fill a bucket or your sink with warm, soapy water. Soak the glass in the water for a few minutes.
Also, do take a look at the light bulb(s) themselves and determine if they need any attention. If your bulbs have a dirty film on them, your room may be getting less light than it should be! Using a damp cloth, very gently wipe any residue from your bulbs and allow the bulbs several minutes to dry completely. Replace the bulbs into their fixtures.
After soaking the glass for a few minutes, use a sponge or cloth to wipe away any remaining grime, then dry it completely with a towel. Replace the glass with the screws or clamps.
If you can't remove the glass or would rather clean them in place, be sure to spray any water or cleaning solution onto a cleaning cloth first, not directly onto the fixture!

  • Reviews
Write Your Own Review

Your Rating