Oala Table Lamp
Oala Table Lamp
Impart A Rich Look And Trendy Style To Your Table Lighting With Our Stylish Range Of Colonial Lamps. These Lamps Not Only Illuminate Your Table Space But Also Gives It A Classy Look. With A Compact Shape And Beautiful Make, These Lamps Are Easy To Keep On Any Table By Saving The Floor Space.
Fixture Material: Glass
Shade Material: Fabric
Assembly Required: No
Fixture Color: Transparent
Shade Color: White
Light Direction: Ambient
Switch Type: On/Off
Bulb Base: E27
Recommended Bulb: LED
Bulbs Needed: 1
Maximum Wattage: 40W
Cord Length: 150 cms
Width: 25 cms
Length: 25 cms
Height: 61 cms
Weight: 6 kgs
Dirty light fixtures can emit up to 20% lesser light than clean ones, so regular cleaning and dusting go a long way toward brightening your living spaces.
For safety purposes, never attempt to clean or work on a lighting fixture with an active electrical current. The best bet is to unplug fixtures or turn off the circuit breaker prior to cleaning. Also, never allow liquid to touch wiring.
In case the glass globe/shade can be removed; support the glass firmly with your hands while you remove the screws or clamps holding it in place. When you've safely removed the glass from the fixture, dump any dirt or dead bugs out into the trash and fill a bucket or your sink with warm, soapy water. Soak the glass in the water for a few minutes.
Also, do take a look at the light bulb(s) themselves and determine if they need any attention. If your bulbs have a dirty film on them, your room may be getting less light than it should be! Using a damp cloth, very gently wipe any residue from your bulbs and allow the bulbs several minutes to dry completely. Replace the bulbs into their fixtures.
After soaking the glass for a few minutes, use a sponge or cloth to wipe away any remaining grime, then dry it completely with a towel. Replace the glass with the screws or clamps.
If you can't remove the glass or would rather clean them in place, be sure to spray any water or cleaning solution onto a cleaning cloth first, not directly onto the fixture!
Fabric shades are typically subjected to common cleaning maneuvers with vacuums or dusters, though they are easily dented, scratched or discolored. So it is important to clean them properly and carefully.
Usually in a fabric shade the softer material is wrapped around a plastic skeleton, so getting it wet is not a problem. However, if too much pressure is applied, they can easily dent and if sharp or metal objects are used, ripping and scratching can occur. So the cleaning has to be done with minimal pressure. Because this material is compatible with moisture, a kitchen sink or bathtub can make the perfect spot for cleaning. You can certainly do something more quick and simple to remove any surface dirt with a cloth or duster, but for a thorough cleaning, try some soapy water, light scrubbing and a gentle rinse to make it look like new again.