Paradox Black Pendant Light
Paradox Black Pendant Light
Paradox Black Pendant Light - Contemporary Lighting for your Interiors
Illuminate Your Space with the Paradox Black Pendant Light
Voylite lumens meter
Description
The Paradox Black Pendant Light makes a handsome and tailored statement in the home. This single suspension metal & glass pendant light is detailed with a smooth and layered composition, complete with a striking two-tone finish as it descends to support a single, visible bulb. With a wide, softly curved clear glass cloche shaped dome, this pendant lends itself well to a vintage filament bulb, which must be purchased separately, adding some flair to the classic and signature style of this piece.
Elevate your interiors with the Paradox Black Pendant Light from Voylite. Order now to infuse your space with contemporary intrigue and a captivating interplay of light that's certain to leave a lasting impression.
Details
Fixture Material: Metal & Marble
Adjustable: No
Assembly Required: No
Color
Fixture Color: Brass & Black
Cord Color: Black
Light Specifications
Light Direction: Ambient
Bulb Base: E27
Maximum Wattage: 40W LED
Dimensions
Diameter: 20 cms
Height: 32 cms
Package Contents
1 Piece of fixture, Screws, Clamps. Bulb is NOT included.
Dirty light fixtures can emit up to 20% lesser light than clean ones, so regular cleaning and dusting go a long way toward brightening your living spaces.
For safety purposes, never attempt to clean or work on a lighting fixture with an active electrical current. The best bet is to unplug fixtures or turn off the circuit breaker prior to cleaning. Also, never allow liquid to touch wiring.
Wash coated metal surfaces with a clean soft cloth soaked in detergent and warm water; rinse thoroughly. Dry the surface with a clean soft white cloth.Do not use abrasive, acid, alcohol-based, or solvent-based cleaners; they may damage the finish.
In case the glass globe/shade can be removed; support the glass firmly with your hands while you remove the screws or clamps holding it in place. When you've safely removed the glass from the fixture, dump any dirt or dead bugs out into the trash and fill a bucket or your sink with warm, soapy water. Soak the glass in the water for a few minutes.
Also, do take a look at the light bulb(s) themselves and determine if they need any attention. If your bulbs have a dirty film on them, your room may be getting less light than it should be! Using a damp cloth, very gently wipe any residue from your bulbs and allow the bulbs several minutes to dry completely. Replace the bulbs into their fixtures.
After soaking the glass for a few minutes, use a sponge or cloth to wipe away any remaining grime, then dry it completely with a towel. Replace the glass with the screws or clamps.
If you can't remove the glass or would rather clean them in place, be sure to spray any water or cleaning solution onto a cleaning cloth first, not directly onto the fixture!
- Reviews