Nubar Drop Floor Lamp

Nubar Drop Floor Lamp

Nubar Drop Floor Lamp

60% of 100

Voylite lumens meter

* Bulb not included


Light the way in your modern living room or home office with this minimal contemporary metal floor lamp. This stylish lamp features a heavy matte black foot to balance a steep C-shaped arc body made from iron with an on-trend brushed black finish. The lamp is capped with a suspended hardback cone shade.

Fixture Material: Metal
Shade Material: Metal
Adjustable: Yes
Assembly Required: Yes

Fixture Color: Black
Shade Color: Black
Cord Color: Black

Light Specifications
Light Direction: Down
Switch Type: On/Off
Bulb Base: In-Built LED
Light Colour: Warm White
Maximum Wattage: 12W

Length: 114 cms
Diameter: 24 cms
Height: 232 cms

Package Contents
1 Piece of fixture, Screws, Clamps

Suitable For
Living, Dining, Bedroom, Home Office


Dirty light fixtures can emit up to 20% lesser light than clean ones, so regular cleaning and dusting go a long way toward brightening your living spaces.
For safety purposes, never attempt to clean or work on a lighting fixture with an active electrical current. The best bet is to unplug fixtures or turn off the circuit breaker prior to cleaning. Also, never allow liquid to touch wiring.
Wash coated metal surfaces with a clean soft cloth soaked in detergent and warm water; rinse thoroughly. Dry the surface with a clean soft white cloth.Do not use abrasive, acid, alcohol-based, or solvent-based cleaners; they may damage the finish.
In case the glass globe/shade can be removed; support the glass firmly with your hands while you remove the screws or clamps holding it in place. When you've safely removed the glass from the fixture, dump any dirt or dead bugs out into the trash and fill a bucket or your sink with warm, soapy water. Soak the glass in the water for a few minutes.
Also, do take a look at the light bulb(s) themselves and determine if they need any attention. If your bulbs have a dirty film on them, your room may be getting less light than it should be! Using a damp cloth, very gently wipe any residue from your bulbs and allow the bulbs several minutes to dry completely. Replace the bulbs into their fixtures.
After soaking the glass for a few minutes, use a sponge or cloth to wipe away any remaining grime, then dry it completely with a towel. Replace the glass with the screws or clamps.
If you can't remove the glass or would rather clean them in place, be sure to spray any water or cleaning solution onto a cleaning cloth first, not directly onto the fixture!

  • Reviews 1
Customer Reviews
  1. Looks good, could be better
    I have 2 comments: 1). Need pads to prevent scuffing the floor 2). The instructions should be accompanied by a YouTube video to put it together.
    Pros: Stylish
    Cons: Difficult to Install, Expensive

    Review by

    Posted on

Write Your Own Review

Your Rating